Download ASRock Motherboard 775Dual-VSTA Drivers for Windows 7, 8.1, 10, Just update ASRock Motherboard 775Dual-VSTA drivers for your device now!
Asrock 775dual Vsta Audio Driver Download
- - LGA 775 for Intel® Core™ 2 Duo/ Pentium® XE / Pentium® D / Pentium® 4 / Celeron® D processors
- FSB 1066/800/533 MHz
- Supports Hyper-Threading Technology
- Supports Untied Overclocking Technology
- Supports EM64T CPU - - Northbridge: VIA® PT880 Pro/Ultra
- Southbridge: VIA® VT8237A - - Dual Channel DDR/DDR2 memory technology*
- 2 x DDR2 DIMM slots
- Supports DDR2 667/533 non-ECC, un-buffered memory
- Max. capacity of system memory: 2GB
- 2 x DDR DIMM slots
- Supports DDR400/333/266 non-ECC, un-buffered memory
- Max. capacity of system memory: 2GB - BIOS- 4Mb AMI BIOS
- AMI Legal BIOS
- Supports 'Plug and Play'
- ACPI 1.1 Compliance Wake Up Events
- Supports Jumperfree
- SMBIOS 2.3.1 Support - - n/a
- - 7.1 CH Windows® Vista™ Premium Level HD Audio (ALC888 Audio Codec)
- - VIA® PHY VT6103
- Speed: 10/100 Ethernet
- Supports Wake-On-LAN
- Supports PXE - - 4 x PCI slots
- 1 x PCI Express Graphics slot (@ x4 mode)
- 1 x AGP slot - - 2 x SATA 1.5 Gb/s connectors, support RAID (RAID 0, RAID 1, and JBOD) and Hot Plug functions
- 2 x ATA133 IDE connectors (support 4 x IDE devices)
- 1 x Floppy connector
- 1 x IR header
- 1 x Game header
- 1 x HDMI_SPDIF header
- CPU/Chassis FAN connectors
- 20 pin ATX power connector
- 4 pin 12V power connector
- CD in header
- Front panel audio connector
- 2 x USB 2.0 headers (support 4 USB 2.0 ports) - HD 8CH I/O
- 1 x PS/2 Mouse Port
- 1 x PS/2 Keyboard Port
- 1 x Serial Port: COM1
- 1 x Parallel Port (ECP/EPP support)
- 4 x Ready-to-Use USB 2.0 Ports
- 1 x RJ-45 LAN Port
- HD Audio Jack: Side Speaker / Rear Speaker / Central / Bass / Line in / Front Speaker / Microphone - Hybrid Booster:
- CPU Frequency Stepless Control
- ASRock U-COP
- Boot Failure Guard (B.F.G.) - - Drivers, Utilities, AntiVirus Software (Trial Version)
- - Quick Installation Guide, Support CD, I/O Shield
- Floppy/ATA 133 Cables
- 1 x SATA Data Cable
- 1 x SATA 1 to 1 Power Cable
- 1 x HDMI_SPDIF Cable - - CPU Temperature Sensing
- Chassis Temperature Sensing
- CPU Overheat Shutdown to Protect CPU Life
- CPU Fan Tachometer
- Chassis Fan Tachometer
- CPU Quiet Fan
- Voltage Monitoring: +12V, +5V, +3.3V, Vcore - - ATX Form Factor: 12.0-in x 9.6-in, 30.5 cm x 24.4 cm
- - Microsoft® Windows® 2000 / XP / XP 64-bit / Vista™ / Vista™ 64-bit compliant
- - FCC, CE
Asrock Driver Updates
ASRock BIOS Upgrade Instruction
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press 'F2' to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the 'A:' prompt, type AFUDOS, hit space bar once, and type BIOS file name then press 'Enter'. For example: A:AFUDOS ANF7R301 'Enter' then you will see a message 'Please wait for BIOS loading ROM'.
After 30 seconds, you will see the message 'Program ended normally', then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press 'F2' to enter the BIOS setup utility during boot up.
In Exit menu, please select 'Load Default Settings' and press 'Enter' to continue.
Select 'Exit Saving Changes' and press 'Enter' to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.
BIOS Update Utility
AFUDOS.EXE: The Flash Memory Writer utility is included in the WinZip format of BIOS file. It updates the BIOS by uploading a new BIOS file to the programmable flash ROM chip on the motherboard. To determine the BIOS version of your motherboard, press 'F2' to enter the BIOS setup utility during bootup, and check the BIOS version from the Main menu. Larger numbers represent a newer BIOS file. This utility works only in DOS mode. (How do I check the BIOS version?)
The Flash Memory Writer utility can not be suitable for all ASRock motherboards. Please use the Flash utility which is included in each BIOS file to update its BIOS. Also ASRock motherboard MUST use ASRock's Flash utility to update BIOS, those uncertified BIOS flashing tools will cause motherboard damage.
Updating BIOS Procedures
Create a bootable system floppy disk.
Download an updated ASRock BIOS file (WinZip format with .zip file extension) from the web site, unzip the BIOS file and save both AFUDOS.EXE utility and BIOS file to the disk you created in step 1.
Boot from the disk you created in step 2.
At the 'A:' prompt, type AFUDOS, hit space bar once, and type BIOS file name then press 'Enter'. For example: A:AFUDOS ANF7R301 'Enter' then you will see a message 'Please wait for BIOS loading ROM'.
After 30 seconds, you will see the message 'Program ended normally', then you have finished upgrading the BIOS.
After finishing upgrading the BIOS, please remove the floppy disk. Restart your system and press 'F2' to enter the BIOS setup utility during boot up.
In Exit menu, please select 'Load Default Settings' and press 'Enter' to continue.
Select 'Exit Saving Changes' and press 'Enter' to exit the BIOS setup utility.
Now, system is booting up with new BIOS.
How do I check the BIOS version?
1.The BIOS version can be found during system boot up.
2.The BIOS version can be found in BIOS setup utility.
Notice
If you encounter problems while updating the new BIOS, DO NOT turn off your system since this corrupt BIOS might cause your system failed to boot up. Just repeat the process, and if the problem still persists, update the original BIOS file. If the Flash Memory Writer utility was not able to successfully update a complete BIOS file, your system may not be able to boot up. If this happens, your system will need service.